Planetary Pipe Cutting Machine Demo

This demonstration shows the Planetary Pipe Cutting Series making clean, burr-free cold cuts on thin-wall tubing — the kind of cut quality that stainless process lines and sanitary piping require, achieved without abrasive discs or flame.

What the Video Shows

The machine clamps onto the pipe OD while a saw blade orbits the pipe on a planetary path, slicing through the wall progressively rather than all at once. Because cutting force is distributed around the circumference, thin-wall pipe is not crushed or deformed, and the cut end comes off square with no burr, no discoloration, and no heat-affected zone. Several models add an optional beveling function, preparing the weld edge in the same clamping.

Series Capabilities

• Pipe OD range: 5-330mm across 9 models
• Wall thickness: 0.5-8mm
• Power: 220V / 1300W drive
• Process: cold sawing — no sparks, no dust, weld-ready ends

Typical Applications

Planetary cutters are built for work where cut quality is non-negotiable: stainless steel process and sanitary piping, boiler and heat-exchanger tubing, HVAC lines, and shop prefabrication of thin-wall spools. Cold cutting also removes the fire-watch and grinding steps that abrasive or thermal methods force on site crews.

Featured Product

• Planetary Pipe Cutting Series — full specifications and model selection
• Planetary series datasheets — per-model technical data