Benchtop Beveling Machine Demo

This demonstration covers the compact end of the plate beveling range: benchtop and feed-through machines that bring machined weld prep to workshops without the floor space or budget for a heavy traveling mill.

What the Video Shows

The workpiece comes to the machine rather than the machine traveling the workpiece. Plates are guided across the cutter head along a fence, producing a consistent machined bevel on each edge. On the feed-through design, drive rollers pull the plate through continuously at 0.6-3.3 m/min — the operator feeds parts in one side and collects weld-ready parts from the other, which is the fastest way to bevel high volumes of small and medium plates.

Machines Featured

• DZ Benchtop Series — clamp thickness 1.5-50mm, bevel angle 20°-70°, 2.2-3kW, at 80-155kg light enough to reposition anywhere in the shop. Two models: DZ-10 and DZ-20.
• Feed-Through Series (DMM-20D) — continuous pass-through processing for 2-40mm plates, bevel angle 15°-60°, 4.75kW total power.

Typical Applications

These machines fit job shops, training facilities, and production cells that bevel parts by the pallet rather than by the seam: brackets, flanges, gussets, machine bases, and small vessel components. Compared with grinding, every part leaves with the same angle and land — the consistency welders need for repeatable joint fit-up.

Learn More

• DZ Benchtop datasheets and Feed-Through datasheets — per-model technical data