KBM Rolling Shear Beveler Demo
Watch the KBM Rolling Shear Series perform low-noise plate beveling. Shear-type beveler for plates 3-25mm with reduced noise operation.
This demonstration shows the KBM Rolling Shear Series beveling plate edges with rotating shear blades instead of milling cutters — the reason it runs dramatically quieter and cleaner than conventional plate bevelers.
What the Video Shows
As the machine feeds along the plate edge, a rotating shear wheel progressively slices the material away in a continuous curl rather than chipping it off. Listen to the sound level in the video: shearing produces a fraction of the noise of milling, and instead of a spray of hot chips there is a single coiled offcut. The finished bevel comes out smooth and burr-free, ready for welding without secondary grinding.
Series Capabilities
- Plate thickness: 3-25mm across 3 models
- Bevel angles: 25°-50° adjustable
- Bevel width: up to 18mm
- Process: cold shearing — low noise, no dust, no thermal distortion
Typical Applications
Rolling shear bevelers suit fabrication shops where noise and housekeeping matter: workshops near offices or residential areas, shipyard panel lines, and plants with strict occupational noise limits. They are equally chosen for stainless and coated plate, where the cold shear action avoids the heat tint and surface contamination that grinding introduces.
Featured Product
- KBM Rolling Shear Series — full specifications and model selection
- KBM datasheets — per-model technical data
KBM Self-Propelled Rolling-Shear Plate Beveler
Self-propelled cold-shear plate beveler that uses a rotating shear disc instead of a milling cutter — beveling speed 2.0 – 3.0 m/min, roughly 4 – 8× faster than carbide-insert milling on equivalent plate. Lowest consumable cost in the line (one wear disc, no inserts). Standard tool for high-volume V-bevel preparation in steel-construction and shipbuilding.
Watch the HDL Handheld Series multi-function beveler in action. Portable beveling solution for plates, curves, and holes.
WatchWatch benchtop beveling machines perform precision plate edge preparation. Compact workshop bevelers for small to medium plates.
WatchWatch the DCM Stationary Pipe Beveling Machine in operation. Heavy-duty stationary beveler for high-volume pipe processing.
WatchGet a quote within 24 hours.
Send us your spec sheet, pipe schedule, or drawing — our engineers reply with pricing, lead time, and recommended models.
- 01Send specs & drawings
- 02Receive quote within 24h
- 03Confirm & manufacture